10 min readJorgAI TeamNov 21, 2026

Tradier API: Tokens, Sandbox, Pricing and Rate Limits

An access keypad with a fingerprint reader on the door of a server cage in a data center, cover for the guide to Tradier API tokens, the sandbox and pricing

Tradier's API comes with a Tradier Brokerage account, and Tradier does not charge for it. Every account holder is issued two tokens on the API Settings page of the web dashboard: one for the live account and one for a paper trading sandbox. A personal token does not expire until you regenerate it. This page covers how to get the tokens, how the sandbox differs from production, what the plans cost, what market data the token unlocks, the rate limits, and what Tradier allows a third-party app to do. Every fact was read on Tradier's documentation and pricing page on November 21, 2026, and the last section describes how JorgAI's own Tradier connection uses a token.

Tradier API access in one table

ProductionSandbox
Who can use itTradier Brokerage account holders, Tradier Partners and Tradier AdvisorsAccount holders, with a separate paper trading token
Base URLhttps://api.tradier.com/v1/https://sandbox.tradier.com/v1/
TokenFrom the API Settings page; lasts until you regenerate itA second token from the same page; a token sent to the wrong environment returns 401
Market dataReal-time, from a consolidated feed; some index data delayed 15 minutesDelayed 15 minutes; no index data and no Greeks
OrdersLive orders in stocks, ETFs and optionsPaper trades, filled against delayed data
StreamingHTTP and WebSocketNot available
Rate limits120 requests a minute for account and market data calls, 60 for trading60 a minute in each category
Cost of API accessNo charge; commissions follow the account's planNo charge
Tradier API access, production against sandbox. From Tradier's API overview, endpoints, rate limits, market data and FAQ pages, read November 21, 2026.

The table is drawn from Tradier's API overview and its endpoints page. The overview states the price in one clause: "API access is included with your account at no extra charge."

How to get a Tradier API token

Once the brokerage account is open, there is no separate API application or approval step for your own account. Tradier's documentation gives three steps.

  • Open a Tradier Brokerage account. The endpoints page is specific about who qualifies: "You must have a Tradier Brokerage account, be a Tradier Partner, or a Tradier Advisor to use these APIs."
  • Copy your tokens. Both are on the API Settings page of the web dashboard, at web.tradier.com/user/api. The documentation says "All Tradier users are issued API tokens for both their live and sandbox accounts."
  • Send the token with each request. It goes in an Authorization header as a Bearer token, with an Accept header of application/json. Order requests are form-encoded.

You also need the account number. Tradier's trading guide lists it as a prerequisite: your "Account ID (e.g. 6YA00001), available from the User Profile endpoint." A login can hold more than one account (Tradier's streaming page gives the example of a cash account, an IRA and a margin account), so the account number tells each call which one to act on.

Two things about a personal token are worth knowing before you paste it anywhere. First, it has no scopes. The authentication page says: "Individual developers do not need OAuth, your token is full access to your account from the moment it is created." Second, it does not time out. The same page calls tokens "full access and permanent until you regenerate a token" and says "they should be treated like passwords and never shared with anyone, any application, or posted to any public repo." Regenerating a token on the API Settings page invalidates the old one, which is the way to cut off anything that holds it. Connecting a trading bot to a brokerage account safely covers what to check before handing a token to any software.

The sandbox and production are separate

Tradier describes the two environments this way: "The sandbox is a paper trading account to test your integration with our API, including working with delayed market data and paper trades." The production environment is for live trading and real-time data. The differences that matter when you test are these.

  • The token. "Tokens are environment-specific." The overview says a sandbox token sent to api.tradier.com, or a production token sent to sandbox.tradier.com, returns 401. Tradier's API FAQ adds that the error "invalid api call as no apiproduct match found" most likely means a wrong address or a production call made with a paper trading token.
  • The prices. "We delay our market data by the industry standard 15 minutes for all sandbox data." Paper trades are filled against those delayed prices. The market data table lists index data and Greeks as not available in the sandbox, and tick data is not available there.
  • Streaming. "Presently, we do not offer a delayed streaming endpoint for paper trading." A program that depends on a live stream cannot be tested end to end in the sandbox.
  • The limits. The sandbox allows 60 requests a minute in every category, half the production allowance for account and market data calls.

The sandbox is not only for code. The FAQ says: "All Tradier Brokerage account holders can create a paper trading account from the WebUI account drop-down, or via the API by using the prefix sandbox.tradier.com/v1 with any endpoint."

What the Tradier API costs

Nothing for the access itself. The FAQ's answer is one sentence: "We don't charge Tradier Brokerage account holders for API access to their account." Tradier's pricing page lists API Access as Included on all three plans. What differs between the plans is the commission on each trade.

LiteProPro Plus
Monthly fee$0$10$35
Stocks, per trade$0.35$0.00$0.00
Equity and ETF options, per contract$0.35$0.00$0.00
Index options, per contract$0.35$0.35$0.10
API accessIncludedIncludedIncluded
Annual IRA fee$30 a year$0$0
Tradier Brokerage plans for stocks and options, from Tradier's pricing page, read November 21, 2026. Futures pricing is listed separately there. Regulatory and clearing fees apply on every plan.

For an account that trades stocks through the API, the choice between Lite and Pro is arithmetic. Lite charges $0.35 a trade and a buy and a sell are two trades. Pro costs $10 a month and charges nothing per stock trade. Twenty-eight trades on Lite cost $9.80; the 29th takes the month to $10.15. So Pro costs less from the 29th stock trade in a month, which comes in the 15th round trip.

Stock trades in a monthLite, at $0.35 a tradePro, at $10 a month
10$3.50$10.00
20$7.00$10.00
29$10.15$10.00
60$21.00$10.00
200$70.00$10.00
Monthly commission cost of stock trades on Tradier's Lite and Pro plans at the prices on its pricing page on November 21, 2026. A buy and a sell count as two trades. Regulatory fees, which are the same on both plans, are left out. Computed by JorgAI.

The fee schedule on the same page lists account fees too. The account minimum is $0. It lists an inactivity fee of $50 a year for an account with fewer than two trades in a year; that line carries a footnote mark, so read the schedule for its conditions. The page's own note says that beyond the subscription, "standard trading, regulatory, and account fees still apply." How these prices sit next to other brokers' is on our broker pricing page.

What market data the token unlocks

The data comes with the account. Tradier's market data page says: "Real-time data is available to all Tradier Brokerage account holders for US-based stocks and options." It adds: "Real-time data is pulled from a consolidated feed from all exchanges." The pages we read describe no separate data plan to buy.

The limits of that data are stated just as plainly.

  • Top of book only. "We offer Level 1 data only."
  • US markets only. "We presently support US-based equities and options data only. This includes US-based ETFs."
  • Some index data is delayed. The FAQ says that in production some index data is subject to the 15-minute delay.
  • Greeks are hourly. Option Greeks come from a third party, ORATS, and are updated once an hour.
  • History is daily. Historical pricing is daily candles; intraday history comes from the time and sales endpoint, which also serves tick data in production.

Tradier API rate limits

Tradier's rate limits page sets three limits, each counted over one minute. "Each limit is enforced by the minute and on a per-access-token basis."

CategoryWhat it coversProductionSandbox
StandardAccount, watchlist, user and order lookups; not placing orders120 a minute60 a minute
Market dataEverything under /markets: quotes, chains, history, clock120 a minute60 a minute
TradingPlacing, changing and cancelling orders60 a minute60 a minute
Tradier API rate limits by category, from Tradier's rate limits page, read November 21, 2026. Each limit is per access token.

The quotes endpoint takes a comma-separated list of symbols, so one call can price a whole watchlist. Tradier's own example: "if you make a /quotes request every second for a minute, you would still have 60 requests left in that minute before hitting the limit." Each rate-limited response carries four headers, X-Ratelimit-Allowed, X-Ratelimit-Used, X-Ratelimit-Available and X-Ratelimit-Expiry, which show how much of the minute's allowance is left.

One detail catches people who write their own client. Going over a limit does not return the usual 429 status. Tradier's documentation says the API answers with HTTP 400 and a plain-text body that begins Quota Violation, followed by the time the limit resets. A program that only watches for 429 will read that as a bad request.

Tradier does not usually raise them. Asked whether it will increase the rate limits for an application, the FAQ answers: "Most likely not."

Streaming, and its limits

For prices that change constantly, Tradier points developers to streaming over polling. The streaming section covers two streams, market data and account events, over HTTP or WebSocket. Four rules apply.

  • Production only. "Market data streaming is only available in the live environment, not in the sandbox environment."
  • One of each. "It is not permitted to open more than one session at a time," which the page explains as one market data stream and one account stream.
  • Sessions are short-lived. After creating a session you have up to 5 minutes to connect before it expires, and HTTP streams close after 15 minutes of inactivity.
  • Account streaming is in beta. The page says it should be used in production applications with caution.

Personal use, partners and OAuth

A personal token is for your own account and your own code. The FAQ puts the line here: "Unless you are a Tradier Partner, Tradier APIs are intended for personal use only." The overview says the same about scope: without Partner status, OAuth and scoped access are not available.

An application built for other Tradier customers goes through the partner program and uses OAuth 2.0. The authentication page gives the lifespans.

CredentialWho has itHow long it lasts
Personal API tokenAny account holder, from the API Settings pageUntil you regenerate it
OAuth authorization codePartner applications10 minutes
OAuth access tokenPartner applications24 hours
OAuth refresh tokenApproved partners onlyDoes not expire
Tradier credentials and their lifespans, from Tradier's authentication page, read November 21, 2026.

OAuth access is scoped: the page lists read, write, market, trade and stream, and the customer approves the scopes an application asks for. A personal token has no such split. The practical difference for a customer is this: an application that connects through OAuth can be given read access without trade access, and a pasted personal token cannot. What an order can be once a connection exists is on our Tradier API order rules page.

Tradier and AI assistants

Tradier documents two ways to use its API with AI tools, on its Using AI page. One is a plain-text summary of the API for coding assistants, at docs.tradier.com/llms.txt. The other is an MCP server, which Tradier says "lets AI agents interact directly with your brokerage account using natural language." The overview names Claude, ChatGPT and Cursor as clients, and setup details are on a page inside the Tradier dashboard.

An assistant connected this way acts when you ask it to. That is a different thing from software that applies rules you set in advance, with no one at the keyboard. Our page on connectors and rules-based automation goes through the difference.

How JorgAI uses a Tradier token

JorgAI connects to Tradier the way this page describes. A member copies the access token and the account number from Tradier and enters them once in Settings. JorgAI checks the pair by reading the account's balances; if that fails, the member is asked to verify the access token and the account number. The token is stored encrypted. The Tradier setup guide walks through the steps, and the brokers page lists every broker JorgAI connects to.

Three choices in the integration follow from the facts above.

  • Orders are whole shares. Tradier's order parameters call for whole numbers for equities, so a dollar budget is converted to shares and rounded down.
  • Every order is read back. Tradier's overview warns: "The place-order endpoint can return 200 even when a downstream system rejects the order." JorgAI reads each order by its id after placing it and counts a position as open only when Tradier reports the fill.
  • Exit prices come from Tradier. For a member connected to Tradier, the price used to check a stop or a target is read from Tradier's quotes with that member's token. If that call fails, JorgAI falls back to its own market data feed. Price history and the market clock come from JorgAI's own feed.

How Tradier's order types, sign-in rules and limits sit beside the other connected brokers is on the broker API capabilities page, and the Tradier review covers the broker itself.

Quick answers

Is the Tradier API free?

Yes for account holders. Tradier's FAQ says it does not charge Tradier Brokerage account holders for API access, and its pricing page lists API Access as Included on the Lite, Pro and Pro Plus plans. Trades made through the API carry the plan's commissions.

How do I get a Tradier API key?

Open a Tradier Brokerage account, sign in to the web dashboard and open the API Settings page at web.tradier.com/user/api. It shows a production token and a sandbox token. Tradier calls them tokens, not keys.

Does a Tradier API token expire?

A personal token does not. Tradier's FAQ says tokens from the settings page never expire, and they last until you regenerate them. The 24-hour lifespan applies to OAuth access tokens used by partner applications.

Does Tradier have a paper trading API?

Yes. The sandbox at sandbox.tradier.com/v1 is a paper trading account with its own token. Its market data is delayed 15 minutes and it has no streaming.

Do I need Tradier Pro to use the API?

No. API access is included on the free Lite plan. Pro at $10 a month removes the $0.35 commission on stock trades and on equity and ETF option contracts, and it costs less than Lite from the 29th stock trade in a month.

What is the Tradier API rate limit?

In production, 120 requests a minute for account calls, 120 a minute for market data and 60 a minute for trading, each per access token. The sandbox allows 60 a minute in each category. A request over the limit returns HTTP 400 with a Quota Violation message.

Is Tradier's API market data real time?

In production, yes for US stocks and options, from a consolidated feed and at top of book only. Some index data is delayed 15 minutes, and Greeks are updated hourly. All sandbox data is delayed 15 minutes.

Can I build an app for other people on the Tradier API?

Not with a personal token. Tradier says its APIs are for personal use unless you are a Tradier Partner. Partner applications use OAuth 2.0, and the documentation gives sales@tradier.com as the contact.

Sources, read November 21, 2026: Tradier's Brokerage API documentation (the overview, endpoints, authentication, rate limits, FAQ, market data, streaming, trading and Using AI pages) and Tradier's pricing page with its fee schedule; and JorgAI's own Tradier integration code. The Lite and Pro comparison is our arithmetic on Tradier's listed prices.

If you want rules you set once to place the orders in your own brokerage account, the start page walks through the settings before any order is placed.

This article is education, not investment advice or a recommendation of any broker, plan, security or strategy. Prices, limits and plan details are Tradier's and can change; check Tradier's own pages before relying on them. JorgAI is software that carries out the rules you set in your own brokerage account; it is not an investment adviser. Tradier is a trademark of its owner, and JorgAI is not affiliated with or endorsed by Tradier. Trading involves risk of loss.

Let the AI do the trading.

Set it up in minutes. 7 day free trial on Starter, Plus and Pro.

Get started free

Get the weekly market read and new tools by email

One email a week: what moved, what the data says, and the next free tool when it ships. No spam, unsubscribe in one click.

More from the blog

Every other post, newest first

268 more posts

Stops, targets and a daily loss limit, enforced for you.

JorgAI runs the rules you set inside your own brokerage account. Zero withdrawal permissions, disconnect anytime.

Get Started

Showing 18 of 268. Keep scrolling.