Stop Loss, Trailing Stop and OCO Orders on Schwab and thinkorswim

To set a stop loss on a Schwab account, open the order ticket for the stock you hold, choose Sell, change the order type to STOP, enter the price at which you want out, and set the time in force to GTC so the order is still there tomorrow. In thinkorswim the same ticket also offers STOPLIMIT, TRAILSTOP, a stop that follows the price up, and, under the Advanced Order menu, 1st trgs OCO: a buy that, once filled, places a profit-taking limit order and a stop together, then cancels whichever one is left when the other fills. Every one of these is a regular-session order. A stop cannot trigger before 9:30 AM or after 4:00 PM Eastern.
This page is the practical version for one broker: the exit orders Schwab accepts in one table, the exact clicks in thinkorswim for a stop, a trailing stop and an OCO bracket, the four settings that decide whether the stop does its job, the same orders through the Schwab Trader API, and what JorgAI sends to Schwab when it places a bracket. It also carries one measurement the platform manual cannot give you. When a stop triggers, how often does it fill below its own price? On six widely held stocks since 2021, about one triggered stop in five was set off by the opening gap, and those filled a median 1.0% below the stop price. The general case for automating exits is on our stop-loss automation guide; here we stay on Schwab.
Schwab's exit orders in one table
| Order | Name in the thinkorswim ticket | What happens at the trigger | The catch |
|---|---|---|---|
| Stop (stop loss) | STOP | Becomes a market order once the activation price is reached | No guarantee the fill is at or near the activation price |
| Stop-limit | STOPLIMIT | Becomes a limit order at the price you set once the activation price is reached | Can miss the market altogether if the price moves through the limit |
| Trailing stop | TRAILSTOP | The stop follows the price by a dollar amount, a percentage or a number of ticks, then becomes a market order when it is reached | Accepted only for stocks listed on NASDAQ, NYSE and AMEX; same fill risk as a stop |
| Trailing stop limit | Trailing stop limit | The same trailing stop, except it becomes a limit order when it is reached | Same listing rule; can go unfilled like any stop-limit |
| OCO (one cancels other) | OCO | Two orders work at once; when one executes, the other is canceled | Each half keeps the catch of its own order type |
| Bracket | 1st trgs OCO | An entry order that, once filled, triggers an OCO pair, usually a profit-taking limit and a stop | The exits do not exist until the entry fills |
On schwab.com and in the Schwab Mobile app the trade ticket carries the single-order versions: Schwab's description of that ticket lists stop, stop-limit and trailing stop orders next to market and limit, with the trailing amount in dollars or percent. The linked orders, OCO and the 1st Triggers family, are described by Schwab as features of its platforms built for active traders, which for most clients means thinkorswim, and thinkorswim is free with the same Schwab login. schwab.com refuses automated readers, so that paragraph rests on Schwab's public description and we quote nothing from it. The steps below come from the thinkorswim manual, which is open to read.
How to set a stop loss in thinkorswim, step by step
These steps protect a position you already hold. They follow the manual's Order Entry Tools page, and the labels in capitals are the ones on the screen.
- Open the ticket. Click SELL for the symbol. The Order Entry tool opens at the bottom of the screen with a sell order for that stock. Set the quantity to the number of shares you want protected.
- Pick the order type. In the Order column, switch the type to STOP. The price you enter is now the activation price, and the ticket marks it MKT because the order becomes a market order once that price is reached.
- Choose what counts as reached. The activation price can be based on STD, which triggers on a trade at that price, on Mark, which triggers when the mark price gets there, or on Bid, which triggers on the bid.
- Set the time in force. Under TIF, a stop accepts DAY, good for the current trading day, or GTC, which keeps working until it fills or you cancel it. The menu shows other choices, and the manual says selecting them results in an error.
- Send it. Click Confirm and Send, read the confirmation dialog, then send. If Auto Send is switched on there is no confirmation dialog, and the manual warns that you will not see the order's warnings or cost disclosures.
A stop-limit uses the same steps with STOPLIMIT as the type and two prices. The one marked STP is the activation price; the one marked LMT is the lowest price you will accept on a sell. Once the activation price is reached, thinkorswim sends a limit order instead of a market order. That protects you from a bad fill and exposes you to no fill, and the manual says so in plain words: in a fast-moving market it might be impossible to execute at the stop-limit price or better. The study further down puts a number on both risks. If you want to see the ticket before using it on a real position, the same screens exist in paperMoney, thinkorswim's practice mode.
How to set a trailing stop (TRAILSTOP)
A trailing stop is a stop whose price moves. For a sell order it follows the stock up and holds still when the stock falls. The manual's trailing stop page uses this example: you buy at $25 and place a trailing stop to sell with an offset of $2, so the first stop value is $23. The stock rises to $35 and the stop follows to $33. The stock turns down, the stop stays at $33, and when the price reaches it the order becomes a market order.
- Start a sell order for the position and, in the Order Confirmation dialog, click Edit so the Order Entry Tools panel appears.
- Choose TRAILSTOP from the Order drop-down list.
- Open Order Rules with the gear-and-plus button at the right of the order line.
- Set the two prices that drive the trail. STOP Type is the price the platform watches. STOP Linked To is the price the trail is measured from: LAST, BID, ASK, MARK or AVG PRC, your average fill price, each as a dollar offset, as a percentage (LAST%, MARK% and so on) or as a number of ticks (LAST T). For a sell order the offset is negative, because the stop sits below the price.
- Click OK, then Confirm and Send.
Two limits apply. thinkorswim accepts trailing stops and trailing stop limits only for stocks that trade on NASDAQ, NYSE and AMEX. And like every stop on this page it is a regular-session order, so the stop you see at 4:00 PM is the one waiting at 9:30 the next morning. How wide to set it is a separate question: our trailing stop test ran 1% to 8% trails on fast movers and on Dow stocks, and what a trailing stop is and when to use one covers the idea from the start.
How to place an OCO bracket (1st Triggers OCO)
A bracket is three orders that behave as one: the entry, a limit order above it to take the profit, and a stop below it. The two exits are an OCO pair, so the position can only be sold once. thinkorswim builds it in three places, all described on the manual's Order Types and Active Trader pages.
From the Order Entry tool
Build the entry order as usual, then open the Advanced Order menu and choose 1st trgs OCO. The manual's example: first buy 100 shares of stock, and when that order fills it triggers an OCO for the profit-taking order and the stop loss. Add the two exit orders by right-clicking the entry in the Order Entry tool and choosing Create opposite order, make one a LIMIT above the entry price and the other a STOP below it, set both to GTC if the position may last past today, and send. Two more choices in the same menu split the exit. The manual's example for 1st trgs 2 OCO is a 200-share buy sold in two 100-share OCO pairs, and for 1st trgs 3 OCO a 300-share buy sold in three.
From the Active Trader ladder
In the second line of the Big Buttons panel choose TRG w/bracket. A new section appears with two extra orders, Limit and Stop. Keep both enabled for an OCO bracket; disable one and you have a plain 1st Triggers order with a single exit. Set each offset from the entry price as a dollar amount, in ticks or as a percentage, then click the ladder to place the entry. In the Bid Size column a click at or below the market adds a buy limit and a click above it adds a buy stop. While the entry is still working you can drag its bubble along the ladder and the exits move with it, keeping their offsets. Clicking the x on the entry cancels the entry and the orders waiting on it; canceling an exit that is waiting does not cancel the entry. The ladder's right-click menu has a shortcut to the same thing: hover over Buy custom and click with OCO Bracket, and thinkorswim builds the bracket as a template in the Order Entry tool for you to edit before sending.
On a position you already hold
Use a plain OCO, which the manual defines as two orders placed at the same time, where the execution of one cancels the other. In the Order Entry tool, start a sell order for the position, set the Advanced Order menu to OCO, right-click the order and choose Create duplicate order, then make one order a LIMIT above the current price and the other a STOP below it, both for the shares you hold. Once it is working, the Monitor tab shows the structure under Working Orders: a key icon marks an order that triggers others, and a link icon joins the two halves of an OCO.
Brackets and trailing stops are as far as thinkorswim's own automation goes for exits. Orders that submit or cancel when a chart study is true are a separate feature with its own limits, covered on can you automate thinkorswim.
Four settings that decide whether the stop does its job
- The trigger basis. STD fires on an actual trade at your price; Mark and Bid fire on quotes. The SEC's investor bulletin on order types makes the same point about every broker: firms use different standards to decide that a stop price has been reached, some the last sale and some the quotation. On a thinly traded stock a quote can touch your stop when no trade has happened there.
- Time in force. A DAY stop is gone at the close. If the position is still open tomorrow, it has no stop until you place another. GTC keeps the order working day after day, though not forever: the schwab-py reference for Schwab's Trader API describes a good-till-cancel order as staying open for six months, so a position held longer needs its stop entered again.
- The session. Stop and stop-limit orders are DAY or GTC orders, and neither works outside the regular session. A stop placed at 3:50 PM is not watching at 6:00 PM when an earnings report comes out. Our Schwab extended-hours guide measured how much of a stock's movement happens while the regular session is closed: 37% to 42% of it, for the same eight symbols used in the study below.
- Shares already committed. A resting sell order reserves the shares it covers. If a GTC stop for 100 shares is working and you send a market order to sell the same 100 shares, Schwab rejects the second order until the first is canceled. We met this in our own integration. If a sell is rejected on a position that carries a stop or a bracket, look for the resting order first.
How often a stop fills below its price: 8,838 entries measured
A stop is a trigger, not a price. The order waits at Schwab, and when the stock trades at the stop price it becomes a market order. If the stock closes above your stop and opens below it the next morning, there was never a trade at your price: the stop triggers on the opening print and sells at whatever the open is. Everyone who writes about stops mentions this. We wanted to know how often it happens.
For six stocks that sit in a great many retail accounts, Apple, Amazon, AMD, Nvidia, Palantir and Tesla, we treated every trading day from January 4, 2021 to November 12, 2026 as a purchase at the close, placed a sell stop a fixed distance below the purchase price, and followed it for up to 20 sessions. That is 1,473 entries per stock and 8,838 in all. When a stop triggered we looked at that morning. If the stock opened at or below the stop price, the opening gap triggered the stop and it sold at the open. If not, the stop price traded during the session.
| Stop distance below the purchase price | Stops triggered within 20 sessions | Triggered by the opening gap | Median fill below the stop price on those | One in ten of those filled at least this far below | A stop-limit at the same price was still unfilled at that day's close |
|---|---|---|---|---|---|
| 2% | 7,140 of 8,838 (81%) | 1,443 (20%) | 0.8% | 3.9% | 484 (34%) |
| 3% | 6,518 of 8,838 (74%) | 1,171 (18%) | 1.0% | 4.1% | 391 (33%) |
| 5% | 5,353 of 8,838 (61%) | 1,009 (19%) | 1.0% | 4.0% | 307 (30%) |
| 8% | 3,911 of 8,838 (44%) | 748 (19%) | 1.2% | 5.0% | 221 (30%) |
| 10% | 3,135 of 8,838 (35%) | 634 (20%) | 1.3% | 5.1% | 164 (26%) |
The share hardly moves with the distance. Whether the stop sat 2% or 10% below the purchase price, between 18% and 20% of the stops that triggered were triggered by the opening gap, about one in five. At 5%, 5,353 of the 8,838 entries hit the stop within 20 sessions, and 1,009 of those were opening gaps. They came from 407 separate mornings, counting each stock's morning on its own, because entries overlap and one bad open can trigger the stops of several. The median gap fill was 1.0% below the stop price, which turns a planned 5% loss into about 6%. One in ten was at least 4.0% below. The worst was Palantir on May 9, 2022, an earnings morning that opened 13.6% below a stop set one session earlier, a loss of about 18% on a 5% stop. Nvidia's open on January 27, 2025 was 10.8% below a 5% stop set two sessions earlier.
A stop-limit with its limit at the stop price avoids the worse fill and takes the other risk. On those 1,009 gap mornings, the price got back up to the limit later in the same session about 70% of the time and the order filled at its price. On the other 307 (30%) it never did, and the stock closed that day a median 3.7% below the unfilled limit, with the position still open. That is the choice the two order types offer on a gap morning: a worse price now, or no sale yet.
| Symbol | 5% stops triggered (of 1,473 entries) | Triggered by the opening gap | Median fill below the stop price | Worst fill below the stop price |
|---|---|---|---|---|
| SPY (S&P 500 ETF) | 296 | 72 (24%) | 0.5% | 3.1% on August 5, 2024 |
| QQQ (Nasdaq-100 ETF) | 500 | 92 (18%) | 0.6% | 3.6% on August 5, 2024 |
| Apple | 611 | 149 (24%) | 0.9% | 6.9% on August 5, 2024 |
| Amazon | 751 | 182 (24%) | 0.8% | 10.6% on October 28, 2022 |
| AMD | 1,018 | 177 (17%) | 1.0% | 8.1% on February 4, 2026 |
| Nvidia | 899 | 157 (17%) | 1.0% | 10.8% on January 27, 2025 |
| Palantir | 1,044 | 144 (14%) | 1.0% | 13.6% on May 9, 2022 |
| Tesla | 1,030 | 200 (19%) | 1.3% | 9.7% on August 5, 2024 |
The two index funds are in the second table for contrast. A 5% stop on SPY or QQQ triggered far less often, and when it did the opening gap was the trigger about as often as on the stocks, 21% of the time for the two together. What changes is the size: the median gap fill was 0.5% below the stop for SPY and 0.6% for QQQ, smaller than for any of the six stocks, which fits a fund that holds hundreds of companies and has no earnings morning of its own.
Read the numbers with their limits. Daily prices can show that the open was below the stop; they cannot show the last few cents of a fill, so stops that triggered during the session are counted as filling at their price, which flatters them a little. The open is taken as the fill on gap mornings; a real market order can fill slightly away from the official open. Entries overlap, so the counts describe how often a stop placed on a random day met a gap, not how many separate events there were. Counting each morning once instead, with the stop measured from the previous close, the opening gap was the trigger 14% to 21% of the time depending on the distance, the same picture. Six volatile stocks are not the market, and nothing here says what the next gap will be. What the data does support is a sizing habit: when you decide how much a position can lose, the stop distance is the usual case, not the worst one.
The same orders through the Schwab Trader API
Software reaches a Schwab account through the Schwab Trader API. Its order JSON has an orderType field, and the schwab-py library's public OrderBuilder reference lists the values Schwab accepts, MARKET, LIMIT, STOP, STOP_LIMIT and TRAILING_STOP among them. A trailing stop also carries a stop price link basis (LAST, BID, ASK, MARK and others), a link type (VALUE, PERCENT or TICK) and an offset, the same three choices as thinkorswim's STOP Linked To list. A stop type field (STANDARD, BID, ASK, LAST or MARK) mirrors the trigger basis on the ticket. Schwab's own API documentation sits behind the developer login, so the library's reference is the public source for these names.
Linked orders use a field called orderStrategyType. SINGLE is one order. OCO holds two child orders, and a fill on one cancels the other. TRIGGER holds an order whose fill places its child. A bracket is a TRIGGER whose child is an OCO, which is thinkorswim's 1st trgs OCO written as JSON. schwab-py wraps the two as one_cancels_other() and first_triggers_second(), and its documentation carries a warning worth repeating: the helpers take orders that have been built but not placed, because placing the pieces first executes both of them. One more thing we learned reading orders back from Schwab: the exit legs of a filled bracket are not listed as orders of their own. They come back nested inside the filled entry, each with its own order ID, so code that reads only the top level sees no stop at all. If you are writing this yourself, the Python route walks through the two community libraries.
What JorgAI sends to Schwab
When a member's rules include both a profit target and a stop loss, JorgAI's Schwab integration sends the buy as a TRIGGER order with an OCO pair attached: a LIMIT sell at the target and a STOP sell at the stop, both good till canceled, both for the regular session, in whole shares. With only one of the two set, the buy triggers that single exit. It is the same structure as a 1st trgs OCO placed by hand, and the two resting orders appear among the account's working orders like any order you placed yourself.
The trailing stop is handled differently. JorgAI does not send Schwab's TRAILING_STOP order. The trail is tracked by the platform while the regular session is open, and the fixed stop inside the bracket stays at Schwab underneath it. The difference matters on a day when a connection fails: a fixed stop and target resting at Schwab keep working, and a platform-managed trail does not. The stop, target and trailing percentages are set once in Settings and apply to new positions. The settings glossary defines each one, and how to automate a Schwab account covers the connection itself.
Quick answers
How do I set a stop loss on Schwab?
Open a sell order for the stock, change the order type to stop (STOP in thinkorswim), enter the activation price below the current price, choose GTC as the time in force so it lasts past today, and send. The order becomes a market order when the stock trades at your price during the regular session.
How do I place an OCO order on thinkorswim?
For a new position, build the entry in the Order Entry tool and choose 1st trgs OCO from the Advanced Order menu, then add a limit sell and a stop sell. In Active Trader, choose TRG w/bracket in the Big Buttons panel and keep both Limit and Stop enabled. For a position you already hold, start a sell order, set the Advanced Order menu to OCO and add a second order with Create duplicate order, so a limit sell and a stop sell work as a pair.
What is the difference between a stop and a stop-limit on Schwab?
A stop becomes a market order at the activation price, so it sells, at whatever price is available. A stop-limit becomes a limit order, so it sells only at your limit or better and can go unfilled. In our measurement of 5% stops on six stocks since 2021, 19% of triggered stops were opening gaps that filled a median 1.0% below the stop price, and a stop-limit at the same price was still unfilled at that day's close on 30% of those mornings.
Does a Schwab stop loss work after hours?
No. Stop and stop-limit orders are DAY or GTC orders and trigger only in the regular session, 9:30 AM to 4:00 PM Eastern. Schwab's extended sessions accept limit orders only. A stock that falls through your stop overnight triggers it at the next open. Schwab extended hours trading has the session rules.
Can a thinkorswim trailing stop be a percentage?
Yes. In the Order Rules dialog, STOP Linked To offers percentage versions of each price, such as LAST% and MARK%, next to dollar offsets and tick offsets. Trailing stops are accepted only for stocks listed on NASDAQ, NYSE and AMEX.
How long does a GTC stop last at Schwab?
Until it fills or you cancel it, up to a limit. The schwab-py reference for the Trader API describes a good-till-cancel order as staying open for six months. Check a long-held position's working orders from time to time, because an expired stop gives no warning on the day the stock falls.
Does a stop loss guarantee my exit price?
No. The thinkorswim manual and the SEC both say the fill is not guaranteed to be at or near the stop price. Across 8,838 entries on six stocks since 2021, about one triggered stop in five was triggered by the opening gap and sold below its price, by a median of roughly 1% and in the worst case by 13.6%.
Sources: the thinkorswim Learning Center's Order Entry Tools, Order Types, Trailing Stop Orders and Active Trader: Entering Orders pages; the SEC Office of Investor Education's bulletin Understanding Order Types (July 12, 2017, updated August 18, 2026); the schwab-py OrderBuilder and order-template references for the Trader API's field names, all read November 17, 2026. Schwab's own pages refuse automated readers, so the description of the schwab.com and Schwab Mobile ticket is Schwab's public description and nothing is quoted from it; check the ticket in your own account. Price data from Yahoo Finance daily bars, computed by JorgAI. JorgAI's own behavior is read from our Schwab integration code on the same date. Schwab, thinkorswim, paperMoney and Schwab Mobile are trademarks of Charles Schwab & Co., Inc., which is not affiliated with JorgAI.
If you would rather have the bracket attached to every position by rules you set once, connecting a Schwab account to JorgAI takes a few minutes, and the start page walks through the stop, target and trailing settings before any order is placed.
This article describes how a brokerage's order types work and is not investment advice or a recommendation of any broker, security or order type. JorgAI is software that carries out the rules you set in your own brokerage account; it is not an investment adviser. Past price behavior is descriptive only and does not predict future results. Trading involves risk of loss.
More in Getting Started
Keep reading
Let the AI do the trading.
Set it up in minutes. 7 day free trial on Starter, Plus and Pro.
Get started freeGet the weekly market read and new tools by email
One email a week: what moved, what the data says, and the next free tool when it ships. No spam, unsubscribe in one click.
More from the blog
Every other post, newest first
247 more posts
Stops, targets and a daily loss limit, enforced for you.
JorgAI runs the rules you set inside your own brokerage account. Zero withdrawal permissions, disconnect anytime.
Showing 18 of 247. Keep scrolling.




















